Huawei AP361 Access Point (11ax indoor,2+2 dual bands,smart antenna)

Huawei AP361 Access Point (11ax indoor,2+2 dual bands,smart antenna) Huawei eKitEngine AP361 is an indoor access point (AP) in compliance with the Wi-Fi 6 (802.11ax) standard. It provides services simultaneously on the 2.4 GHz (2x2 MIMO) and 5 GHz (2x2 MIMO) frequency bands, achieving a maximum device rate of 1.775 Gbps. This AP features high bandwidth, high concurrency, and compact size, facilitating flexible deployment and saving customer investment. Such strengths make the AP a good fit for indoor coverage scenarios, such as small and micro enterprise workplaces, small- and medium-sized hospitals, commercial real estate, budget chain hotels, and primary and secondary schools.

-Dual-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2), providing a maximum rate of 575 Mbps and 1.2 Gbps, respectively, and a rate of up to1.775 Gbps for the device.

- 1 x GE electrical port.

- Built-in smart antenna: automatically adjusts the coverage direction and signal strength based on the intelligent switchover algorithm. Such capability enables the AP to flexibly adapt to the application environment changes, providing accurate and stable coverage as STAs move.

- Working modes: Fit, Fat, and cloud management.

- Deployment and O&M through the HUAWEI eKit app

First supported version

V200R023C00

Integrated fixed device

Y

Installation Type

Wall,Ceiling,T-Rail

Dimensions without packaging (H x W x D) [mm(in.)]

Diameter x depth: 180 mm x 35 mm (7.09 in. x 1.38 in.)

Dimensions with packaging (H x W x D) [mm(in.)]

200 mm x 231 mm x 61 mm (7.87 in. x 9.09 in. x 2.40 in.)

Weight without packaging [kg(lb)]

0.45 kg (0.99 lb)

Weight with packaging [kg(lb)]

0.75 kg (1.65 lb)

CPU

2-core, 1.2 GHz

Memory

DDR3 256 MB

Console port

None

Power supply mode

PoE

Storage

NAND Flash 256 MB

Rated input voltage [V]

NA

Input voltage range [V]

PoE: 802.3af

Service port surge protection

PoE port: Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B

Maximum number of physical ports on the entire device

GE (RJ45) x 1, 10M/100M/1000M auto-sensing

Long-term operating temperature [°C(°F)]

0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)

Storage temperature [°C(°F)]

–40°C to +70°C (–40°F to +158°F)

Long-term operating relative humidity [RH]

5% RH to 95% RH

Long-term operating altitude [m(ft.)]

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Atmospheric pressure [kPa]

53kPa - 106kPa ETSI 300 019-2-3

Ground

floating ground

Radio number

2

MIMO spatial streams

Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2

Wi-Fi standard

2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax

Radio interface

Built-in smart antennas

Antenna gain

2.4G: 4 dBi/chain (peak) 2 dBi (combined gain) 5G: 5 dBi/chain (peak value) 3 dBi (combined gain)

Maximum transmit power

2.4G: 17 dBm/chain 20 dBm (combined power) 5G: 17 dBm/chain 20 dBm (combined power)

MTBF [year]

440.3

MTTR [hour]

2

Maximum power consumption [W]

8.8

Maximum heat dissipation [BTU/hour]

28.5

802.3bt power supply description

No function is limited.

802.3at power supply description

No function is limited.

802.3af power supply description

No function is limited.

DC power supply description

DC power supply is not supported.

Operating frequency band

2.4GHz,5GHz

Frequency stability [ppm]

+/-20