Delock USB 2.0 IR Camera Module 3.14 mega pixel 80° V5 fix focus Description
The Delock USB 2.0 camera module offers in compact construction low power consumption as well as high resolution. It is ideal for installation in industry components like IPCs, embedded systems, sensors, notebooks, smartphones, tablets or instrument manufacture. You can perform with suitable IR lighting shots in the dark.The use of a photosensitive sensor with back side illumination (BSI) expands the scope of this module.
Specification
• Connector: USB 2.0 5 pin jack SMT, 1 mm pitch
• Resolutiob: 3.14 Mega Pixel
• Without optical IR filter
• Standard SCCB interface (I2C Bus)
• Output support for RAW RGB, RGB565/555/444, CCIR656,
YUV422/420, YCbCr422 and compression
• Maximum resolution: QXGA (2048 x 1536)
• Automatic image control functions including
- Automatic exposure control (AEC)
- Automatic white balance (AWB)
- Automatic band filter (ABF)
- Automatic black-level calibration (ABLC)
• Image quality controls including colour saturation, gamma,
sharpness (edge enhancement), lens correction, white pixel canceling,
noise canceling, and automatic 50/60 Hz luminance detection
• Supports scaling
• Power consumption:
Sensor suspend: 90 mA
Sensor active: 430 mA ± 5 mA @ 640 x 480 pixel
• Operating voltage: 5 V DC
• Operating temperature: 5 °C ~ 50 °C
• Relative humidity during operation: max. 80 %
• Sensor size: 1/4 inch
• Sensitivity: 0.6 V (lx s)
• Signal to noise ratio: 36 dB
• Dynamic range: 68 dB
• Fix focus: 0.3 m ~ infinite
• Lens: F/2.8
• Frame rates:
30 fps @ HVGA, VGA, XGA, 720p, QVGA
15 fps @ UXGA, 1080p, QXGA
• Dimension (LxWxH): ca. 60 x 8 x 13 mm
System requirements
• PC with UVC support
• Windows Vista/ 7/ 8/ 10
• DirectX 9.0c and above
• Linux 2.6.15 and above with Video4Linux
• Minimum CPU P4 1.4 GHz, 512 MB RAM
Package content
• Camera module
• CD ROM with user manual
Zákaznický servis |
577 691 216 teno@teno.cz |
Počítače Software |
577 691 201 frnoch@teno.cz |
Papír Kancelářské potřeby |
577 691 216 vitkova@teno.cz |
Spotřební materiály |
577 691 204 hampl@teno.cz |
COPY CENTRUM |
577 691 204 copy@teno.cz |
SERVIS KOPÍREK |
577 691 221 teno@teno.cz |
Copyright 2006 - 2015 TENO.cz, všechna práva vyhrazena. Pokud není uvedeno jinak, jsou uvedené ceny vč. DPH.
Ceny se mohou v průběhu nakupování měnit bez předchozího upozornění. obrázky mohou být jen ilustrativní.