Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge

Delock Converter RS-232 > RS-232 with 3 kV Isolation 600 W power surge This RS-232 to RS-232 isolator by Delock is designed to protect the connected components from electrostatic discharges and power surge. In addition, the galvanic isolation avoids data transmission errors by uneven ground voltages. Power can be provided through the serial interface or the included power supply. DIN rail mounting is supported.

Specifikace

Connector:

Host: 1 x D-Sub 9 pin Serial RS-232 female

Device: 1 x D-Sub 9 pin Serial RS-232 male

1 x DC 1.3 x 3.5 mm female

Data transfer rate up to 1 Mbps

Data Bit: 5, 6, 7, 8

Stopp Bit: 1, 1.5, 2

Parity: None, Even, Odd, Space, Mark

Signals: TXD, RXD, CTS, RTS, DCD, DSR, DTR

LED indicators for status TX / RX and power supply

Galvanic isolation 3 kV (optical isolation)

600 W power surge for the RS-232 interfaces

600 W power surge at the DC Connector

± 15 kV ESD protection for all signal pins

Power supply RS-232 interface pin 9: 12 V (optional)

Power supply: 10 - 30 V

Power consumption: ca. 50 mA

Operating temperature: - 30 °C ~ 75 °C

Relative humidity: 5 ~ 95 % (not condensing)

Storage temperature: - 40 °C ~ 85 °C

Housing material: plastic

Dimensions (LxWxH): ca. 88 x 54 x 22 mm

Accessories for mounting on 35 mm DIN rails

Specifikace napájecího zdroje

Wall power supply

Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.48 A

Output: 12 V / 1.6 A

Ground outside, plus inside

Dimensions:

inside: o ca. 1.3 mm

outside: o ca. 3.5 mm

length: ca. 9.5 mm

Systémové požadavky

Devices with RS-232 interfaces

Obsah balení

Converter

Power supply

Mounting set for DIN rail

User manual

Balení

• Krabice