Delock adapté SATA 22 Pin > 1 x M.2 NGFF + 1 x mSATA This Delock converter enables you to connect a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format or a mSATA module. The converter can be installed into your system internally through a SATA 22 pin interface.
Note
The operation of both modules at the same time is not possible. If you connect both modules to the slots, only the M.2 NGFF module will be identified. For activation of the mSATA module the M.2 NGFF module needs to be removed.
Specifikace
• Connector:
1 x SATA 6 Gb/s 22 pin male >
1 x 67 pin M.2 NGFF key B slot
1 x mSATA slot (full size)
• Interface: SATA
• Supports M.2 NGFF modules in format 2280, 2260, 2242 and 2230 with key B
or key B+M based on SATA
• Maximum height of the components on the module: 1.35 mm, application of
double-sided assembled modules supported
• LED indicator for power and activity
• PWM chipset: max. 3 A output current, short circuit protection, in-rush current
suppression, thermal shutdown protection
• Bootable
• Dimensions (LxW): ca. 98 x 65.5 mm
• OS independent, no driver installation necessary
Systémové požadavky
• A free SATA 22 pin interface
Obsah balení
• Converter
• Mounting material
Balení
• Box
Zákaznický servis |
577 691 216 teno@teno.cz |
Počítače Software |
577 691 201 frnoch@teno.cz |
Papír Kancelářské potřeby |
577 691 216 vitkova@teno.cz |
Spotřební materiály |
577 691 204 hampl@teno.cz |
COPY CENTRUM |
577 691 204 copy@teno.cz |
SERVIS KOPÍREK |
577 691 221 teno@teno.cz |
Copyright 2006 - 2015 TENO.cz, všechna práva vyhrazena. Pokud není uvedeno jinak, jsou uvedené ceny vč. DPH.
Ceny se mohou v průběhu nakupování měnit bez předchozího upozornění. obrázky mohou být jen ilustrativní.