Zyxel WAX510D, Single Pack 802.11ax 2x2 Dual Optimized Antenna exclude Power Adaptor, EU and UK, Unified AP, ROHS-1 year

Zyxel WAX510D, Single Pack 802.11ax 2x2 Dual Optimized Antenna exclude Power Adaptor, EU and UK, Unified AP, ROHS-1 year WAX510D, Single Pack 802.11ax 2x2 Dual Optimized Antenna exclude Power Adaptor, EU and UK, Unified AP, ROHS-1 year NCC Pro Pack license bundled

True WiFi 6

The WAX510D is truly the next generation of wireless (WiFi 6) AP, especially for businesses looking to strike the right balance between performance and budget. Its built-in 2nd Generation WiFi 6 (Qualcomm 802.11ax 2.0) chipset allows the access point to take advantage of the full range of WiFi 6 technologies including uplink OFDMA and MU-MIMO, which can’t be found in the earlier releases of 802.11ax products. The WAX510D boasts an impressive quad-core processor with 2 network accumulators to guarantee that a smooth and consistently fast service is provided to each client at all times.

An access point that fits your need

We understand that mounting an access point to the ceiling isn’t always possible due to the challenging environments like warehouses, historical buildings or stylish hotels were the aesthetics of the building are a priority. The WAX510D is equipped with a dual-optimized antenna that is selectable, allowing the access point to be mounted on the wall or on the ceiling without compromising on performance and coverage.

The smartest choice

The WAX510D is not only efficient at delivering impressive high speeds with smooth and consistent delivery to wireless clients, but also it’s efficient on power. The WAX510D can deliver its impressive performance while keeping the consumption of PoE within the PoE+ standard, so that you can enjoy the latest WiFi 6 technology offering without the need to invest in upgrading your traditional switching architecture.

Manage it your way!

As it comes with support for NebulaFlex Pro, Zyxel’s scalable, cloud-based management system, the WAX510D can be managed via NCC (Nebula control Center), on-premises controller or simply operate alone (controller less). You can choose the way that is best suited to your needs.

Standard IEEE802.11 ax/ac/n/g/b/a

MIMO MU-MIMO

Wireless speed 2.4GHz: 575Mbps

5GHz: 1200Mbps

Frequency band 2.4 GHz (IEEE 802.11 b/g/n)

USA (FCC): 2.412 to 2.462 GHz

Europe (ETSI): 2.412 to 2.472 GHz

5 GHz (IEEE 802.11 a/n/ac)

USA (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz

European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz

Bandwidth 20-, 40- and 80-MHz

Conducted typical transmit output power US (2.4GHz/5GHz): 23/26dBm

EU (2.4GHz/5GHz): 20/25dBm

RF Design

Antenna type Dual optimized Antenna

Antenna gain 2.4GHz: Peak Gain 5dBi

5GHz: Peak Gain 6dBi

Minimum Receive sensitivity Min. Rx sensitivity up to -101 dBm

WLAN feature

Band Steering Yes

WDS Future Support

Mesh AP (By License) Future Support

Mesh AP for multiple SSID with VLAN Future Support

Smart mesh Future Support

Fast roaming Pre-authentication, PMK caching and 802.11r

DCS (Auto Channel) Yes

Load balancing Yes

Security

Wireless Security

WPA

WPA-PSK

WPA-Enterprise (WPA/WPA2/WPA3)

Access management

L2-isolation

MAC filtering

Rogue AP detection

EAP

IEEE 802.1X

RADIUS authentication

Networking

IPv6 Yes

VLANs Yes

WMM Yes

U-APSD Yes

DiffServ marking Yes

Management

Operating mode

Nebula Cloud managed

Controller-managed

Standalone

ZON Utility

Discovery of Zyxel switches, APs and gateways

Centralized and batch configurations

IP configuration

IP renew

Device factory reset

Device reboot

Device locating

Web GUI access

Firmware upgrade

Password configuration

One-click quick association with Zyxel AP Configurator (ZAC)

Zyxel AP Configurator

Batch AP configuration

Batch AP firmware upgrade

Batch AP profile backup

Zyxel Wireless Optimizer

WiFi AP planning

WiFi coverage detection

Wireless health management

Web UI/ CLI Yes

SNMP Yes

Physical Specifications

Item Dimensions (WxDxH)(mm/in.)

180 x 180 x 39 / 7.09 x 7.09 x 1.54

Weight (g/lb.)

453g / 1

Packing Dimensions (WxDxH)(mm/in.)

229 x 216 x 64 / 9.02 x 8.5 x 2.52

Weight (g/lb.)

770g / 1.7

Included accessories

Mount plate

Mounting screws

MTBF (hr) 635,837

Physical Interfaces

Ethernet port

1 x 10/100/1000M LAN

Power

PoE (802.3)at: power draw 17 W

DC input : 12 VDC 1.5A

Environmental Specifications

Operating Temperature

0°C to 50°C/32°F to 122°F

Humidity

10% to 95% (non-condensing)

Storage Temperature

-30°C to 70°C/-22°F to 158°F

Humidity

10% to 90% (non-condensing)

Certifications

Radio

FCC Part 15C

FCC Part 15E

ETSI EN 300 328

EN 301 893

LP0002

EMC

FCC Part 15B

EN 301 489-1

EN 301 489-17

EN55022

EN55024

EN61000-3-2/-3

EN60601-1-2

BSMI CNS13438

Safety

Safety EN 60950-1

IEC 60950-1

BSMI CNS14336-1